A Integrated Compressed Air Solution
Model: DHV-SAT series integrated permanentmagnet frequency conversion Rotary Screw Compressor
Brand: DREAM
Working Pressure: 8~16 [ bar ] 116.0~232.0 [ psig ]
Air Capacity （FAD）: 0.2~3.8 [ m³/min ] 7.1~134.2 [ cfm ]
Power: 5.5~22 [ KW ] 7.5~30.0 [ hp ]
Other parameters, please inquiry us.
The Four-in-one/ All-in-one Oil-injected Rotary Screw Compressor (VSD/FSD) boasts a compact, four-in-one design that simplifies installation. All you need to do is connect the power supply and gas pipe, and it's operational. Featuring straightforward maintenance requirements, a frequency conversion system for maintaining constant pressure (thereby reducing waste), and a spacious 420L gas storage tank, this compressor is also equipped with the DHV-A series air compressor for exceptionally low noise levels during operation.
Product Features
■ IP54 oil-cooled permanent magnet synchronous motor is integrally connected with the air end, with high transmission efficiency and durability.
■ Double frequency conversion of air end and fan, which can save more than 30% energy than ordinary power frequency air compressor.
■ Compact structure, small machine and small footprint. Easy maintenance, maintenance can be done by opening the door.
■ Multi-wing centrifugal fan, high wind pressure, fast heat dissipation, noise 20dBA lower than ordinary screw;
■ The standard temperature control valve with the most classic sliding three-way structure can effectively avoid the change of discharge temperature. The mixed-flow structure is used to effectively prevent the phenomenon of starting oil temperature rising and the machine being stuck due to lack of oil when the machine is started.
■ Control and electrical system: can be set in Chinese / English bilingual, can realize the joint control of up to 16 machines and supporting post-processing.
Durable, efficient and stable air end
1. Adopt the design idea of "large rotor, large bearing, low speed" to reduce noise and vibration, and increase the life and stability of the host ;
2. The tooth surface is processed by a rotor grinder to create a high-precision rotor, which is the first guarantee for the air end high efficiency and stability ;
3. Adopt new type 5:6 asymmetric rotor tooth profile, high-precision three-coordinate measuring machine for comprehensive measurement,increase the air flow by 5%-10%.
1.Screw compressor special intake valve, the unit is easy to start, with automatic adjustment function, low flow rate, low pressure loss, reduce energy consumption, low intake noise;
2. Reliable minimum pressure maintenance valve, low pressure loss, accurate control, super fast return seat, to ensure that the user does not return the gas;
3.Temperature control valve (part) : mixed-flow temperature control valve: The unit is configured with mixed-flow temperature control valve to ensure that the unit is more convenient to start in a low temperature environment, and ensure the oil supply of the unit at any time; By controlling the oil supply temperature of the main engine, the unit is guaranteed to be in the best performance state.
1. Large color LCD touch screen, with good man-machine interface, touch screen with anti-miscontact and sleep function;
2. Customized vector inverter, perfectly matched with the motor, low frequency and high torque:
3. Fully monitor the parameters of the machine, including voltage detection, three-phase imbalance detection, over pressure, over temperature, etc., without special care;
4. Configure the internet of things, you can view the unit running status on the mobile phone;
5. Independent air duct design, suitable for various working conditions.
1.Adopt centrifugal fan, new separate flow cooling fan design, with special cooler, cooling effect is better, more energy saving;
2.Compared with axial fans, centrifugal fans have higher wind pressure and lower noise;
3.Frequency conversion fan control, constant oil temperature, prolong the service life of lubricating oil;
4.Due to high wind pressure, the cooler and filter are less likely to be blocked.
1.IP54 protection grade, more stable and reliable than IP23 in harsh environments;
2. Low temperature rise design, higher efficiency, extend the service life of the motor;
3. Use ceramic plated bearings to completely eliminate the influence of shaft current on bearings;
4.Made of rare earth permanent magnet material, the torque is large when starting and running, and the current is small when starting and running;
5.Reasonable magnetic field design, magnetic density distribution, energy-saving motor operating frequency range is wider, low running noise;
6. With the operation of the frequency converter, the frequency conversion soft start is realized, which avoids the strong mechanical impact of the machine and equipment when the motor is started at full pressure, which is conducive to protecting the mechanical equipment, reducing equipment maintenance and improving the reliability of the equipment.
Stable and low-noise belt drive
1. Adopt Germany OPT toothed belt, good synchronization and low noise;
2. High power transmission efficiency, wear resistance and longer service life than standard belts ;
3.Reliable structure design and convenient belt adjustment.
1.The filtration area of the air filter exceeds 150% of the normal need, the inlet pressure loss is low, and the energy efficiency is good;
2.The oil filter is made of imported glass fiber material, and the rated capacity of the oil filter is ≥1.3 times the circulating oil volume, with high filtration accuracy and good durability;
3.Imported glass fiber oil core, good filtering effect, low pressure loss of oil core;
4.Three filter position design is reasonable, easy maintenance, reduce downtime.
* Please feel free to contact us, we will reply you within 24 hours.
