Oil-free water Lubricated (7-10 Bar)

Home > Products > Oil-free Screw Air Compressor > Oil-free water Lubricated (7-10 Bar) > Oil Free Water Lubricated Fixed Speed Screw Air Compressor

Oil Free Water Lubricated Fixed Speed Screw Air Compressor

Model:DMW-G Series; Brand: Dream

Rated Power: 7.5~250KW

Air Capacity: 1.0~43.0m³/min

Working Pressure: 0.7~1.0MPa

Product Features

■ Stable and reliable air end, water lubricated, 100% oil-free, quality assurance.

■ IE3 motor, save your electricity cost, IP54, B-level temperature rise is suitable for harsh environments such as large dust and high temperature;

■ Coupling connection, more energy saving;

■ Multiple noise reduction design, calculated according to noise theory, with special flame retardant muffler cotton inside, to reduce the noise of the unit and provide a quieter use environment.

■ Multi-function intake valve group, start without load, motor load is small. Use high-efficiency filters to effectively filter particulates in the air;

■ Axial fan with tube-fin cooler has high wind pressure and low noise. It is exhausted upward through a specially designed air duct to prevent hot air from returning;

■ Modular design of water cooler, vertical installation, high heat exchange efficiency, stable operation and long service life;

■ Optimized shock absorption pad to reduce vibration and noise;

■ Routine maintenance parts adopt openable door panels, the installation position is easy to replace, and maintenance is more convenient.

■ Motor overload protection.

■ The pipeline system is designed according to the design pressure, and the reasonable pipeline is selected, the pipeline pressure loss is low, and the energy efficiency of the unit is improved

■ The use of 304 stainless steel pipes will not rust and corrode even under high temperature and humidity conditions, and the service life is longer

■ Separate design for cold and hot zone, no heat zone inside the unit, electrical components are in low temperature zone, longer service life

■ Dedicated control system, multi-channel pressure sensor and multi-channel temperature sensor to comprehensively detect the running state of the unit; the user interface is more friendly, the control is more accurate and reliable.

Water-lubricated screw air end

Water-lubricated screw air end

1. High-quality stainless steel casing, there is no risk of corrosion inside and outside the machine head

2. Using water as the compression seal and cooling medium, the use cost is low.

3. With advanced sealing and isolation technology, compressed air is cleaner and can be pure and oil-free.

4. The axial and radial forces of the single screw are balanced, and the star wheel rotates freely with the screw under the lubrication of the water film. Therefore, the host components run smoothly under low load, ensuring low noise and durability.

Specialized  motor for air compressor

Specialized motor for air compressor

1.Imported brand bearings, protection class IP54, insulation class F, suitable for harsh environments such as large dust and high temperature.

2. IE3 high-efficiency motor uses less electricity and reduces your cost of use.

3. The motor has a large margin design and a large starting torque, which can meet the requirements of full life use under various working conditions.

High-quality and efficient coupling

High-quality and efficient coupling

1. The coupling is a torsionally elastic coupling with failure protection function, which can effectively damp and reduce the vibration and shock generated during the operation.

2. The elastic body is only under pressure and can withstand greater loads. The drum-shaped teeth of the elastic body can avoid stress concentration.

Advanced and reliable electronic control system

Advanced and reliable electronic control system

1. Intelligent control system, with a good human-machine communication interface; high-quality electrical components are selected, and contactors are imported brands.

2. Special program, with multi-channel pressure sensor and multi-channel temperature sensor, comprehensive detection of the running state of the unit, automatic control of the machine state, no need for special care

3. Emergency stop function, there is a push-type emergency stop switch in a prominent position of the unit, which can be immediately stopped in an emergency.

4. Independent air duct design, applicable to various working conditions.

Internal rotor fan

Internal rotor fan

1. IP44 cooling fan, Class F insulation;

2. Compared with the outer rotor fan, the inner rotor fan has higher air pressure, more air volume and better cooling effect;

3. Due to high wind pressure, the cooler and filter are less likely to be blocked

Plate cooler (for water cooling)

Plate cooler (for water cooling)

1. It is made of stacked metal sheets with a certain corrugated shape. The material is corrosion-resistant, easy to clean, and has a long service life.

2. Unit volume, large heat exchange area, high heat exchange efficiency.

3. Compact structure, light weight and small footprint.

Air filter

Air filter

Air filter: the filter area exceeds 150% of the normal need, and the inlet pressure loss is low, The pore size of the filter paper is about 5um, which can better filter dust and protect the air end.

Water filter: The water filter is a full-flow filter. The shell is made of stainless steel with a special filter element. It has high filtration accuracy and long life. It can reliably filter impurities in the system to ensure the supply of clean lubricating water. The water filter is the standard configuration of the water circulation system to keep the system clean.

Inlet valve

Inlet valve

Inlet valve: The valve body is made of corrosion-resistant material, suitable for various environments, and has a long service life; heavy hammer structure, accurate and rapid air volume control, low pressure loss; high integration, no wearing parts, simple maintenance and convenient adjustment.

Minimum pressure maintenance valve: The valve body is made of corrosion-resistant material, low pressure loss, precise control, ultra-fast seat, to ensure that the user gas does not return.

Ion exchange water softener

Ion exchange water softener

1. Fully automatic control of operation and regeneration operation process without manual operation.

2. Use ion exchange resin to reduce the hardness of raw water, to achieve the purpose of softening hard water, avoid scaling and protect the system.

3. The exchange resin is renewable and the use cost is low.

Parameter

Water lubricated seriesWorking pressureCapacityPowerNoiseAir outlet pipe diameterNet weightDimensions(mm)
barpsig(m3/min)cfmkWhpdBkgLengthWidthHeight
DMW-7G71021.2427.51058±3G1″50011358001000

81161.1397.51058±3G1″50011358001000

101451.0357.51058±3G1″50011358001000
DMW-11G71021.657111558±3G1″50011358001000

81161.553111558±3G1″50011358001000

101451.346111558±3G1″50011358001000
DMW-15G71022.071152060±3G1″550140010001200

81161.864152060±3G1″550140010001200

10145//152060±3G1″550140010001200
DMW-18.5G71023.110918.52561±3G1″600140010001200

81162.89918.52561±3G1″600140010001200

101452.58818.52561±3G1″600140010001200
DMW-22G71023.7131223061±3G1″655140010001200

81163.4120223061±3G1″655140010001200

101453.0106223061±3G1″655140010001200
DMV-30G71025.2184304064±3G11/2″1150192011701320

81164.7166304064±3G11/2″1150192011701320

101454.3152304064±3G11/2″1150192011701320
DMW-37G71026.1215375064±3G11/2″1200192011701320

81165.6198375064±3G11/2″1200192011701320

101455.0177375064±3G11/2″1200192011701320
DMW-45G71027.5265456066±3G11/2″1320192011701320

81166.8240456066±3G11/2″1320192011701320

101456.0212456066±3G11/2″1320192011701320
DMW-55G710210.0353557566±3DN501520193013201535

81169.0318557566±3DN501520193013201535

101457.8275557566±3DN501520193013201535
DMW-75G710213.04597510070±3DN501620193013201535

811612.04247510070±3DN501620193013201535

1014510.03537510070±3DN501620193013201535
DMW-90G710215.55479012070±3DN501800193013201535

811614.04949012070±3DN501800193013201535

1014512.54419012070±3DN501800193013201535
DMW-110G710220.070611015072±3DN803100230016001750

811618.063611015072±3DN803100230016001750

1014516.056511015072±3DN803100230016001750
DMW-132G710225.088313217572±3DN803250230016001750

811623.081213217572±3DN803250230016001750

1014520.070613217572±3DN803250230016001750
DMW-160G710227.095316021572±3DN1004500286016001800

811625.590116021572±3DN1004500286016001800

1014524.084816021572±3DN1004500286016001800
DMW-185G710230.0105918525074±3DN1004500286016001800

811628.098918525074±3DN1004500286016001800

1014525.088318525074±3DN1004500286016001800
DMW-200G710236.0127120027074±3DN1254800315018502050

811633.0116520027074±3DN1254800315018502050

1014527.095320027074±3DN1254800315018502050
DMW-250G710243.0151925035074±3DN1255200315018502050

811641.0144825035074±3DN1255200315018502050

1014538.0134225035074±3DN1255200315018502050


Cooling method: (Air cooling:DMWV-22G~DMWV-45G)、(Water cooling: DMWV-55G~DMWV-250G)

Video

Brochure

FAQ

  • 1. Requirements for using lubricating water (after-sales service)

    A: 

    Pure water must be used to ensure that the water is pure.

  • 2. How to add lubricating water?

    A: 

    When the water inlet of the equipment is connected to the water pipe, the equipment will automatically replenish water if there is a certain water pressure.

  • 3. Do I need to change the lubricant during maintenance?

    A: 

    Water lubrication equipment does not need to add lubricating oil, it is lubricating water instead of lubricating oil

  • 4. Does the equipment have an oil separation core?

    A: 

    Water lubrication equipment does not require an oil separation core.

  • 5. How to add water to replenish water?

    A: 

    Automatically control water replenishment

  • 6. What to do if there is water shortage?

    A: 

    The equipment will automatically add lubricating water according to the water level

  • 7. What are the maintenance supplies?

    A: 

    Air filter, water filter

  • 8. Is it guaranteed to be oil-free? (Sales)

    A: 

    Dream’s oil-free units have been certified by Guotong Rheinland and have a Class0 certificate

  • 9. Can tap water be used?

    A: 

    The water requirement for water-lubricated oil-free units is soft water. For specific water quality requirements, see the manual

  • 10. Will it rust?

    A: 

    All materials in contact with water are made of stainless steel and will not rust

  • 11. Can it be made of stainless steel?

    A: 

    All materials in contact with water are stainless steel

  • 12. What material is the casing of the air compressor?

    A: 

    Cold rolled steel sheet

  • 13. Can the water tank be omitted?

    A: 

    The unit needs to automatically replenish and drain water according to the status, and need to be equipped with a water tank

  • 14. Is the air coming out with a lot of water?

    A: 

    The exhaust temperature of the unit is about 50℃, and the gas needs to be dried by post-processing equipment

  • 15. Can the tap water be directly connected?

    A: 

    The water requirement for water-lubricated oil-free units is soft water. For specific water quality requirements, see the manual

  • 16. What should I do if it freezes outdoors in winter?

    A: 

    The screw air compressor is required to be placed in the air compressor room. Please follow the instructions for long-term downtime

  • 17. If the air compressor is placed outdoors, how to avoid freezing in winter?

    A: 

    The screw air compressor is required to be placed in the air compressor room. Please follow the instructions for long-term downtime

  • 18. Motor cooling method

    A: 

    Air-cooled motor

Related Products

For more than a decade, Dream (Shanghai) Compressor Co., Ltd has been striving to become one of the leading manufacturers of compressed air solutions in China.

Contact Us

Mob.: +86 134 8216 1490

E-mail: sales@dmcomp.com

Skype: +86 134 8216 1490

WhatsApp: +86 134 8216 1490

Add.: No.30 Caoli Road, Jinshan District, 201502 Shanghai, China

Request a Quote

Copyright © Dream (Shanghai) Compressor Co., Ltd. All Rights Reserved | Sitemap